Electrical Home Improvement

What You Need to Know About Electrical Home Improvement
By Arthur Sneddon

Improving a home built before the computer age can mean adding electrical power to some rooms. If this is a major job calling for extra wiring running throughout the home or adding junction boxes or circuits, the inexperienced home owner would do well to take a course at the local home improvement store or hiring a contractor. The dangers of combining an electrical home improvement job with an inexperienced do-it-yourselfer are obvious. Some less obvious problems include on the job accidents that are often covered by the electrician’s insurance.

Simple Jobs

One of the electrical home improvement jobs that can be tackled by a homeowner can involve working with a wall outlet. Sometimes an outlet has to be added to accommodate additional appliances or computer equipment. Sometimes an outlet has to be moved as part of a job of reconfiguring a room. There is basic information necessary for such simple electrical home improvement tasks that will increase the do-it-yourselfer’s confidence and make the job safer.

When working with electricity, always wear rubber-soled shoes to avoid becoming part of a completed circuit and avoid wet floors for the same reason. Also avoid using metal ladders. Those rubber-soled shoes are useless if they are standing on metal surface. Make sure your tools have rubber grips, and check the grips on old tools to make sure they are not worn. Think twice about wearing rings while performing those electrical home improvement jobs. Check your local building codes to make sure that the job you are planning is legal.

Before starting on your electrical home improvement job, check that the correct circuit breaker is off as it’s not enough to turn off a light switch. If your home was wired by a professional electrician, the wiring will be done in a uniform manner. If you are planning to perform electrical home improvement jobs on a home that pre-dates your local building codes, you may find that the wiring has been done in a more creative way.

Normally, the black wires are the “hot” wires. This is the wire that carries the electrical current from the breaker box to the switch or outlet. The white wire is the “neutral” wire which carries the unused electricity back to the breaker. The plain or green wire is the “ground” wire which is necessary to carry extra electricity back to the breaker then to a rod in the ground outside where it is rendered safe. Remember when working on an electrical home improvement job to take care in working with electrical circuits and try not to become part of one.

Author Details:
Arthur Sneddon, copywriter for various websites including, The A to Z of Home Improvement, part of an ambitious project to cover various subjects.

Source: Information Junkie

NOTE: This article may be reproduced ONLY if this note, the source, the author details and links remain in place.

Related Home Improvement Articles: